Basic Info
  • Factory Location: weifang

    Main Sales Markets: North America,Central/South America,Western Europe,Australasia,Eastern Europe,Australasia,Asia,Middle East,Africa

  • Sample Provided: no

    Working principle The qualified feed water is input into the condenser after increased the pressure by multilevel pump. And then enters into each preheater (the feed water will be heated by the secondary steam and distilled water in the condenser, in the fist stage preheater, the feed water heated by the industrial steam condensate water, after enters the other stages preheater, it is heated by the secondary steam condensate water). Next the feed water is input into the water distributor of the 1st stage evaporator, which is spouted to the inside of the heating tubes and flowed as film. The produced second steam with drips enters into the gas and steam separating setting from the bottom of the heating tubes. The separated pure steam enters into the next stage as heating steam, meanwhile, the feed water, which is not evaporated, enters into the next stage. And then it is repeated above mentioned process. The pure steam from last stage is converged with each stage condensed water (except 1st stage), after cooling and drainage of the non-condensable gas, (according to different model, there should be a device for discharge the non-condensable gas continuously) it is became the WFI. There is an on-line conductivity test at the output orifice, the qualified distilled water will be output as the WFI, and the unqualified will be discharged.
Send your message to this supplier
  • From:
  • To:
    Shandong Eagle Pharma Machinery Co.,Ltd.
  • Send a Copy to this Email
  • Message:
    Upload Images / Files
    - Supports jpg, jpeg, png,
     gif, pdf, doc, docx,
     xls, xlsx, txt, rar and zip
    - Max upload 3 files;
     Max  total size: 3MB
    (0/3)

    Enter between 20 to 4,000 characters.This is not what you are looking for ? Post a Sourcing Request Now

  • Verification:
PharmaSources Customer Service