Basic Info
  • Factory Location: shanghai,China

    Main Sales Markets: North America,Central/South America,Western Europe,Eastern Europe,Australasia,Eastern Europe,Australasia,Asia,Middle East,Africa

  • Sample Provided: no

    FP saving corrosion resistant centrifugal pumps , FPZ pump, with enhanced polypropylene (CFR-PP) injection molding . High mechanical strength , corrosion resistance strong , unique scientific structure on self-priming pump , pump chamber has a suction chamber , storage chamber , back check valve liquid -liquid separation chamber , back hole. Just before starting the infusion priming, after having to repeat the infusion after priming , when the suction medium , the liquid can be intermittent, may continue to be fluid suction off the fluid within 15 minutes , no need for additional mechanical seal water cooling , simple, safe no leaks , replace the liquid product is the best pump . Suitable for -40 ℃ -120 ℃ (PVDF) and various transport corrosive medium -40 ℃ -80 ℃ (RPP) is . Precautions 1 , after a period of time, found mechanical seal leakage is due to face wear , adjust ring , stainless steel semi- relaxed two screws appropriate to move forward, hand pump shaft to rotate easily without resistance better, too Song will leak , wear tight mechanical seal life impact . 2 , 8-10 hours a day for optimum power . 24 hours of continuous operation should spare parts, regular replacement repair, replacement period is generally two to three months maturity should be removed to repair . Does not affect the production, the production of non- continuous operation can repair any time . 3, the transport medium weight greater than 12 should reprovision motor , otherwise it will affect the head or cause the motor to burn out . 4 , demolition order: Remove the motor bracket, bottom screws, remove the mechanical seal cover, cooling water nozzle , loosen the bolt ring clasp , stationary ring plate bolts around the pump cover bolts, the impeller shaft rod set screws loosen and tighten the 3-5mm, beat with a hammer rod , after the impeller to play loose , remove the rod, impeller and mechanical seals , mechanical seals should be unloaded by hand , can not be beat with a metal tool to prevent damage. 5, the overhaul : Clear the pump casing , front pump cover, impeller, mechanical seal components within the dirt and washed clean, no damage can continue to use , check the mechanical seal faces have destructive ends of the ring , ring face wear or scratch over the less available on the flatbed of fine sand carried metallographic polished , you can continue to use.
Send your message to this supplier
  • From:
  • To:
    Shanghai BaiNuo Pump & Valve Co., Ltd.
  • Send a Copy to this Email
  • Message:
    Upload Images / Files
    - Supports jpg, jpeg, png,
     gif, pdf, doc, docx,
     xls, xlsx, txt, rar and zip
    - Max upload 3 files;
     Max  total size: 3MB
    (0/3)

    Enter between 20 to 4,000 characters.This is not what you are looking for ? Post a Sourcing Request Now

  • Verification:
PharmaSources Customer Service