Benchtop Grinder Processing The Soft Medium-Hard Brittle and Fibrous Sample Lab Grinder

We are a comprehensive enterprise specialising in the research, development, production, sales and service of vacuum centrifugal concentration, vacuum freeze-drying, grinding and ultrasonic crushing laboratory instruments and life science instruments and have a professional factory.

⊙High number of operations with good results                  ⊙Touch screen easy to operate
⊙No cross infection                                                                ⊙Good repeatability

-Product Features

1. Efficient and fast work can be completed within thirty seconds or so 192 * 2 ml of the sample grinding. Save time and labor, batch to batch, intra-batch differences are small. The extracted protein activity is higher and the nucleic acid fragments are longer.

2. Grinding tank in the crushing process in a fully closed state, can be used in disposable centrifuge tubes and beads. Samples are kept intact in the jar, avoiding cross contamination between samples and outside contamination.

3. Touch screen humanized operation interface, built-in program controller, grinding time, rotor vibration frequency and other parameters can be set.

4. When low temperature grinding environment is needed, the adapter with samples can be immersed in liquid nitrogen to cool down for 1-2 minutes, remove it and move it to the main machine for quick fixation to start grinding, no need to freeze again, saving liquid nitrogen.

5. Set the same program for the same tissue sample to get the same grinding effect. Short working time, the sample temperature will not rise. 

6. Mainly used for crushing, mixing, homogenization and cell pulverization, sample pre-treatment of biological samples, large-volume automated rapid extraction of genomes.

7. Sample characteristics: hard, medium hard, soft, brittle, elastic, containing fiber.

8. 7-inch touch screen, display work status, can be convenient and intuitive operation (optional programming software)

9. Vertical direction and left and right radial vibration generated by the impact force, friction.

10.Grinding jar material: hard rigid, stainless steel, tungsten carbide, onyx, zirconia, PTFE aluminum alloy, can be applied to any material samples, can accept customization.

11.Grinding ball material / diameter: hard rigid, stainless steel, tungsten carbide, agate, zirconia, ceramics, chrome steel, quartz sand / 0.1-30mm, according to the experimental requirements.

12. Grinding mode: wet grinding, dry grinding, ultra-low temperature grinding can be.

13. The number of grinding platform: can accept the number of grinding jar ≥ 2.

14. In and out of the material size: no requirements, according to the grinding tank adjustment.

15. Final discharge particle size: ≤3μm.

16. Stroke of fixture: 40mm (vertical).

17. Acceleration / deceleration: within two seconds to reach the maximum / low speed.

18. Safety devices: working with safety locks, open cover protection, full protection. Fastening device with automatic center positioning.

19. Two types of adapters can be selected.

20. Sample handing capacity: 

⊙192*(0.2-0.5ML)/96*2ML  
⊙36*(5-10)ML/24*15ML 
⊙4*25ML/4*50ML 

-Product Parameters

Product Code：BN91002

Product Model: BIONOON-48

Liquid Nitrogen Pre-Cooling Function: Yes

Vibration Frequency: 0-70Hz,O-2100r/Min

Typical Pulverizing Time: 15s-2min

Noise Level at Max Speed: ≤50dB(a)

Power Rating: 220V/50Hz:350W

Protection Type: IP 30

Delivery Time: 7-15 Days

After-sales Service: Lifelong Service

Specification: 380*340*350mm

-Scope of application

⊙Plant Grinding
⊙Tissue Grinding
⊙Fungi Grinding
⊙Grinding of food and medicine
⊙Mineral Grinding
⊙Plastic Grinding

-Company Profile

-FAQ

We are pleased to offer you our high-quality products with exceptional service. The following are some questions for reference.

Thanks for considering our products. If you have any further questions or need assistance, please contact us at any time.